Amsa Power Sdn. Bhd.

Portfolio

Products & Equipment

Select a product category from the panel below. All products are supplied with full technical documentation and local support.
Geny
Three Phase Meter Calibrator
Geny
Feeder Identifier
Itron
Cyble 5 AMR/AMI Module
Itron
Itron Smart Water Meter
Tektelic
KONA Micro IoT Gateway
Meijia
Meter Test Bench
Geny Instrumentation
Three Phase Meter Calibrator
High-precision three-phase reference standard for energy meter calibration. Used in utility test labs for type testing, acceptance testing, and periodic verification against IEC standards. Delivers traceable accuracy for single and poly-phase meter verification.
Three Phase Meter Calibrator
3-Phase AC IEC 62053 Type Testing Lab & Field Traceable Accuracy
ApplicationEnergy Meter Calibration
Phase3-Phase, 3/4 Wire
ComplianceIEC 62053 Series
Use CaseLab / Field
OutputCalibration Certificate
Brand OriginGeny, China
Request DataSheet
Contact our technical team for the full product datasheet and specification sheet.
Request DataSheet →
Geny Instrumentation
Feeder Identifier
Portable feeder identification instrument for rapidly tracing live LV distribution feeders. Reduces diagnostic time on-site for utility field crews performing network mapping, fault location, and maintenance operations on low-voltage distribution networks.
Feeder Identifier
LV Distribution Live Network Feeder Tracing Field Portable
ApplicationLV Feeder Tracing
NetworkLow Voltage Distribution
OperationLive Line
Form FactorHandheld / Portable
Request DataSheet
Contact our technical team for the full product datasheet and specification sheet.
Request DataSheet →
Itron — Water Division
Cyble 5 AMR / AMI Module
Clip-on radio communication module enabling both AMR walk-by and AMI network reading on existing ITRON mechanical water meters — without meter replacement. Dual-mode operation lets utilities transition at their own pace. IP68 rated for submerged pit environments. 10+ year battery life.
Itron Cyble 5 AMR/AMI Module
LoRaWAN wM-Bus T2/C2 Sigfox IP68 10+ Year Battery Retrofit
ProtocolLoRaWAN / wM-Bus / Sigfox
Battery Life10 Years +
IP RatingIP68
Connectivity CertificationsLoRaWAN R1.0.4 , Sigfox V2.6.0, OMS V4.1.2
Frequency (AMI)915–928 MHz
Frequency (AMR)434 MHz
Humidity0–100% Submersible
Request DataSheet
Contact our technical team for the full product datasheet and specification sheet.
Request DataSheet →
Itron — Water Division
Itron Smart Water Meter
Itron's water metering portfolio covers the full range of commercial and industrial revenue metering applications, from DN15 to DN300. Featuring Cyble 5 retrofit modules with LoRaWAN, wM-Bus, and Sigfox connectivity, Itron meters deliver AMR-to-AMI upgrade paths without replacing existing infrastructure — rated IP68 with 10+ year battery life.
Itron Flostar M Water Meter
Residentials Industrials
SizesDN15 - DN20 (Residential), DN40 - DN300 (Industrial)
Smart Metering ReadyCyble-ready
Accuracy StandardISO 4064
Register ProtectionIP68
MID ApprovedYes
Request DataSheet
Contact our technical team for the full product datasheet and specification sheet.
Request DataSheet →
Tektelic Communications
KONA Micro IoT Gateway
Indoor LoRaWAN gateway with embedded ChirpStack Network Server and Node-RED Application Server — enabling standalone deployment without external LNS infrastructure. Built-in 4G modem with 4-hour battery backup provides always-on connectivity for mission-critical deployments.
Tektelic KONA Micro IoT Gateway
LoRaWAN Embedded LNS 4G / 3G Modem 4hr Battery Backup BACnet / Modbus TCP Node-RED
Tx Power14–27 dBm
Rx Sensitivity−139.5 dBm (SF12)
BackhaulEthernet + 3G/4G
ISM BandsAS923, US915, EU868
MTBF830,000 Hours
Operating Temp0°C – +40°C
Request DataSheet
Contact our technical team for the full product datasheet and specification sheet.
Request DataSheet →
Meijia
Gravimetric Water Meter Test Bench MJ3210-10
Full-automatic gravimetric water meter verification system designed in accordance with JJG162-2019 and JJG1113-2015 verification regulations. Integrates industrial automation control, LabVIEW graphical software, and machine vision technologies for high-precision testing of water meter tightness and indication errors for DN15–DN50 water meters.
Meijia Gravimetric Water Meter Test Bench
Accuracy Class 0.2 Static Mass Method LabVIEW System Machine Vision DN15–DN50 Full Automatic
Accuracy Level 0.2
Verification Method Static Mass Method
Flow Range 0.01–40m³/h
Supported Meter Sizes DN15–DN50
Electronic Scale 60kg / 600kg
Inspection Tables 1–10 Sets
Sealing Test Pressure ≤ 2.0MPa
Power Supply 3×220/380V · 7.5kW
Enquire for Full Specs
Contact our technical team for a product consultation and detailed datasheet tailored to your verification and testing requirements.
Request DataSheet →
Scroll to Top